<strike id="daoun"><nobr id="daoun"></nobr></strike>
      1. <th id="daoun"><option id="daoun"></option></th>

        <strike id="daoun"></strike>

      2. <th id="daoun"><option id="daoun"></option></th>

        中文版    English

        Address: Qianzhou Industrial Park, Huishan District, Wuxi, Jiangsu
        Tel: 0510-83380282
        Contacts: Zhu Zhiming 13961810087
        Contacts: Zhu Yihao 18261567975
        Contacts: Yang Xifeng 13861470120
        Fax: 0510-83396128
        E-mail: zyftjxa@126.com
         Position: Home > PRODUCT > Mixing Series > Y-shaped double-screw conical mixer
        Y-shaped double-screw conical mixer
        Y-shaped double-screw conical mixer

        Y-shaped double-screw conical mixer
        Y type double helix cone mixer is widely used in chemical industry, metallurgy, food, pharmaceutical, chemical fertilizer, paint, paint, dye, pesticide, rubber, feed additives, refractory materials, fine chemical, new material, electronic plastic, ceramic, mining, building materials industries, such as solid and \"solid\" (i.e., powder and powder), a combination of liquid and liquid, powder and liquid. The machine for mixing materials wide adaptability. For heat-sensitive materials will not cause overheating, don't pressure feedback and grinding particle materials, the mixture will not produce specific grvity and granularity, are different hierarchical segregation phenomenon, the coarse material, fine and ultra fine grained, fiber or flake mixture has good adaptability.
        Working principle
        Mixer drum within the two asymmetric spiral rapid rotation of the material up, forming two asymmetric along the wall stud shape material flow from bottom to top, turning arm driven by spiral orbit, making the materials into different level outside the screw stud in the envelope, part of the material being misplaced to ascend, another part of the material being thrown stud, so as to achieve closed circular bearing materials constantly updated spread, the upper part of the mentioned two materials to center the recess confluence, formed a downward material flow, rapid filling at the bottom of the hole, thus forming the convective circulation. Due to the movement of the composite, the material in a short period of time received mixing, mixing precision is higher.
        Structural characteristics
        YI type double helix cone mixer is consist of spray atomization device, transmission parts, cylinder cover, screw, barrel, discharge valve, etc.br />      1.Spray atomization device: spray atomization device is composed of rotary joints and spray parts, spray parts is fixed with flange to the lower cover of distribution box, rotary joint and spray parts is active connected so that the rotary joint is fixed on the pipeline.
             2. The drive part: the rotation motor and the revolution motor movement shall be adjusted to a reasonable speed through the worm gear and wheel gear, then pass to the spiral to implement two kinds of movement of rotation and revolution.
             3. The cylinder cover: the cylinder cover holds up the whole of the transmission parts, transmission parts is covered with spiral cylinder, which is equipped with the feeding inlet, observe opening, clean opening and maintenance hole.
             4. Screw parts: cylinder body two asymmetric arrangement of the spiral shall make rotation and revolution of planetary motion to stir the materials in a larger range achieving fast to a uniform mixing.
             5. Cylinder part: Cylinder part is a tapered structure to bearing the materials, making discharge quick, clean, free of materials left and zero discharge blind area.
             6. The discharge valve, discharge valve is installed in the bottom of the barrel, which is used to control the material and the feeding, this discharge valve can be divided into three kinds of structure forms that are manual, pneumatic, electric, which could add liquid discharge valve (slurry valve) according to user’s needs.
        Working data
        TypeY/YI 200 300 500 1000 1500 2000 3000 6000 10000
        Gross capacity(m3) 0.2 0.3 0.5 1 1.5 2 3 6 10
        production capacity (t/h) 0.2-0.8 0.3-1 0.5-1.5 2-2.5 2-4 2.5-5 4-7.5 7-15 12-20
        barrel rotation speed(r/min) 143 143 143 57 57 57 57 53 53
        barrel rotation speed(r/min) 2 2 2 2 2 2 2 1.6 1.3
        power(kw) 3 3 3.5 5.2 5.2 7 8.7 18 29.5
        mixing time (min) 6~10 6~10 6~15 8~18 8~20 10~25 10~25 10~27 10~30
        Size(L×W×H) 890×1620 940×1670 1142×2000 1610×2520 1636×2800 1970×3130 2210×3470 3050×5920 3050×5920